Hickory Dining Table with Legs Assembly Instructions
This is a step-by-step guide to assembling our standard Hickory dining table with legs. Requires 2 people.
Required Tools:
1/2” Socket Wrench
Before you begin: Remove any packaging material and separate the pieces. You should have the following pieces:
Step 1: Flip the table top upside down. Place a blanket or some form of padding underneath of the top if placing on a hard surface.
Step 2: Place one leg at each corner and align the bolts with the holes on the bottom of the table.
Step: 3: Place a washer and a nut on each bolt and tighten with a 1/2” socket wrench until snug.
Step 4: Tilt the table on its side, then lift it onto its feet.
