Bed Assembly Instructions
One of our goals is to make our furniture enjoyable from the time you pick it up until you pass it down to your grandkids. With this is mind, first impressions matter. We’ve designed our beds to be assembled quickly with minimal tools. This guide works for all of our beds with the exception of the White Cedar Mountain Collection bed. Requires 2 people.
Required Tools:
1/2” Socket Wrench
Square #2 (or Philips #2) Screwdriver
Recommended: Drill or Impact Driver with a square #2 bit for easier installation
Before you begin: Remove the plastic caps covering the lag bolts on the headboard and footboard.
Step 1: Using the pre-installed brackets and lag bolts attach one side rail to the headboard, followed by attaching it to the footboard. Do not tighten bolts.
Step 2: Attach the second side rail to the headboard & footboard. Tighten all bolts with a 1/2” socket wrench. Do not over tighten.
Step 3: Install the slats by placing them on the pegs or metal brackets which are pre-installed on each side rail.
Step 4: Attach the vertical supports to the bottom of the slats using the screws provided.
